|
The berofix product series is a powerful and flexible hardware solution to connect ISDN (BRI, PRI), analog (FXO/FXS) and GSM lines to any SIP based VoIP system. berofix is not a classical Media Gateway nor a standard PCI/PCIexpress card where you have to install any drivers, therefore we call it a “Gateway card”. Due to the special design of the hardware berofix will be detected as a standard Realtek-Network card by the operating system. Usually the driver for this network card will be loaded automatically by the OS. The only thing you have to do is to set up the IP-address before you can access the web interface which is very easy to use. The berofix product series has a modular concept and supports the following hardware DSP based Voice-Processing features:
- Codecs: G.723.1 and Annex A, G.729 a/b, G.726, G.711 u/a
- G.168/G.165 Echo cancellation with echo path change detection, up to 128ms
- Voice Activity Detection / Comfort Noise Generation
- DTMF Digit Detection and Generation
- T.38 fax relay (V.27,V.29 and V.17)
- SIP over TCP with optional TLS support (SIP signalling only)
- SRTPv(available Q3 2011)
- Q.SIG feature set: CNIP
- DSS1, EuroISDN conform (feature set: Clip/No-Screening,CLIR, COLP, UUS, MCID, CD, CNIP)
- Runs on every operating system with every SIP based VoIP solution like 3CX, Asterisk, OpenSER, Swyx ..
- PCM Bus interconnection between berofixes to enable hardware bridging for transparent voice, data and fax transmissions
- Runs on every operating system with every SIP based VoIP solution like 3CX, Asterisk, OpenSER, Swyx ..
- Modular concept enabling the mix of available technologies (for example E1 and S0, or S0 and FXS)
|
The berofix product series consist of a baseboard and the Modules. Each baseboard can carry up to two Modules. The berofix baseboards are available as PCI or PCIexpress cards as well as a standalone Box with the following channel densities:
 |
|
 |
|
 |
| (4-16 channels) |
|
(16-64 channels) |
|
(64-120 channels) |
The following Modules are available and can be plugged on the berofix baseboards.
- BF4S0, 4 Port BRI Module
- BF1E1, 1 Port PRI Module
- BF2E1, 2 Port PRI Module
- BF2S0FXS, 2 Port BRI and 2 Port FXS Module
- BF4FXO, 4 Port FXO Module
- BF4FXS, 4 Port FXS Module
- BF2GSM, 2 Port GSM Module
Additionally to the baseboard and Modules the following accessories are available for the berofix product series:
- bfBridge (to use all 4 RJ45 slots on a baseboard with one bf4S0)
- bnTAdapters (to connect 2 BRI Lines on 4 RJ45 slots)
- bnPCM Cable (to interconnect berofix baseboards)
- bnE1Crosscable (to connect berofix E1 ports to other systems)
Due to the modular concept you can mix PRI, BRI, FXS, FXO and GSM Modules on one card or box with full above mentioned features which makes the berofix cards very unique.
|
